Tool Lifts

Titan E-Z Lift (12VDC Electric)

Titan E-Z Lift (12VDC Electric)


Air hammers, rock drills and tampers can be the heaviest items at the jobsite. Loading and unloading them onto the vehicle is strenuous and often leads to injuries. The All new BOSS® Titan EZ-Lift eliminates those concerns by doing the work for you.

The Titan EZ-Lift stows your tools safely in a standard utility body 50” cabinet between jobsites. The Titan EZ-Lift will hold up to three air tools and will raise and lower them from the vehicle to the ground as needed. The unit is a fully selfcontained, all electric drive system with built-in safety features to prevent accidental or rapid movement while using 60% less amperage then the hydraulic equivalent.


Dimensions47" H x 19.5" W x 15.5" D
Capacity3 tool mounting with 300 lb. lift capability
Travel38" lift/drop from mounting surface
Weight190 lbs


Quantity of one (1) Boss Titan E-Z Lift self contained electric-drive mechanical tool lift(s) to include the following as standard equipment:

  • Boss electric linear actuator self-contained on mechanical lift assembly designed for lifting 300 Lbs.  Capable of a 34.0-inch lift/drop from the mounting surface.
  • One-year warranty on electric linear actuator and mechanical lift assembly.
  • Linear actuator to include 12 VDC operation, ball detent overload clutch, IP65 protection rating, integral load holding brake, and built-in 30A circuit breaker.
  • Operating parameters:  Equal time on/off, 4 minutes maximum.
  • Mechanical lift:  19.5 inches wide, 15.5 inches deep, and 47.00 inches tall, capable of holding three tools within the perimeter of the mechanical lift assembly.
  • Three steel shanks for tool placement (state size required when placing order.)
  • Integral load holding brake will hold the lift and tools at any point in the lift movement.
  • Electrical components to include:  Raise/lower pendant for simplistic control.
  • Safety devices to include:  ball detent overload clutch, thermal overload incorporated into the motor, safety chains for individual tools, and necessary warning and information decals.
  • Operation, parts, and maintenance manual.
  • Installed and tested by a factory authorized and trained distributor.