Engine Driven Compressors

Engine Driven Systems

Diesel Utility Skid

Diesel Utility Skid

This Boss Utility Skid incorporates a diesel engine driven, skid mounted air compressor with all the accessories. This Boss application is usually mounted to the customers vehicle for various tasks such as paint striping, vacuum systems, and air tools. It can be tied into the truck fuel system or have a separate fuel tank for operation.

The DUS integrates a 4-cycle, 4-cylinder, John Deere engine, with reserve horsepower when operating compressor at rated capacity and pressure. The rated capacity up to 250 CFM free air, delivered at a maximum of up to 200 PSIG when operating at rated speed.

Model210 DUS250 DUS
Capacity Delivery210 CFM @ 100 PSIG250 CFM @ 100 PSIG
Rated Power74 HP (55.2 KW)74 HP (55.2 KW)
Dimensions (WxLxH)30" W x 84" L x 66.75" H*30" W x 84" L x 66.75" H*
40kw Generator Package

40kw Generator Package

The 40 kw generator is a frame mounted, diesel engine-driven, revolving field, alternating current (AC) generator. The generators revolving field is driven at 1800 rpm by the diesel engine.

This generator can be used for prime or stand by power and can be wired 3 phase or 1 phase at a frequency of 60 hertz. Voltage can be 120/240 1-PH or 208 to 240; and 416 to 480 volt 3-PH.

 

For more information and ordering please click here.

Eliminator

Eliminator

the Elininator - Auxillary Power Unit

The Eliminator is our new Auxiliary Power Unit. By eliminating the need for the truck’s engine to idle, the Eliminator reduces wear and tear on the drive engine, plus reduces fuel consumption by up to 90% all while providing the comfort of a climate controlled cab! In addition, the patented heat pump system allows for less components, resulting is less weight, moving parts, less noise and an easy installation.

Save fuel and extended the life of the vehicle -The BOSS Eliminator is an ExtraOrdinary Power Source!

Features and Benefits

• Complies with no-idle regulations

• Reduced emissions

• Lower noise levels

• Easy to install - mounts on rails

• Reduced emissions

• Fuel saving

• Less wear and tear on the vehicle

• Built in the USA

 

Final Tier 4 Diesel Utility Skid

Final Tier 4 Diesel Utility Skid

The BOSS Final Tier 4 Diesel Utility Skid is based on the success of its predecessor, the iT4 DUS. This unit incorporates a proven Final Tier 4 74 HP diesel engine mated to a skid mounted air compressor. Strong, durable and now with a full digital control system - The BOSS B-CAN!


This controller allows for a full system integration featuring all the typical safety shutdowns such as; Engine High Coolant Temperature, Engine Oil Pressure, High Compressor Pressure and Compressor Discharge Temperature, all at your finger tips! 

Typically, this BOSS application is mounted to the customers' vehicle for various tasks such as paint striping, vacuum systems, and air tools. It can be tied into the truck fuel system or have a separate fuel tank for
operation.

ModelFT4 210 DUSFT4 250 DUS
Capacity Delivery210 CFM @ 100 PSIG250 CFM @ 100 PSIG
Rated Power74 HP (55.2 KW)74 HP (55.2 KW)
Dimensions (WxLxH)32" W x 84 5/8" L x 65 1/4" H*32" W x 84 5/8" L x 65 1/4" H*
Journeyman 18

Journeyman 18

The Journeyman 18 is an ideal portable gas engine driven compressor suited perfectly for the Contractors and Tire Service Industry!

The Right Size for the Right Job!

Built around a heavy-duty 9 gallon capacity tank, movable with a center mounted wheel, this Single-stage, twin cylinder compressor fits right at home in the back of a truck or on the job-site.

ModelJourneyman 18
Capacity Delivery18 Displaced CFM @ 100 PSIG
Rated Power6.5
Journeyman 30

Journeyman 30

The Journeyman 30 is an ideal portable gas engine driven compressor suited perfectly for the Contractors and Tire Service Industry!

The Right Size for the Right Job!

Built around a heavy-duty 30 gallon capacity tank, this two-stage, cast-iron twin cylinder compressor fits right at home in the back of a truck or on the job-site.

ModelJourneyman 30
Capacity Delivery30 Displaced CFM @ 175 PSIG
Rated Power13 HP
WorkMaster GW

WorkMaster GW

The WorkMaster GW

14HP Single Stage Two Cylinder Portable Gas Compressor/Generator/Welder
A unique multi-function Gas piston 13 CFM (Delivered), 150 AMP Welder and 4.0kW Generator that is ideal for the entry level mechanic and contractor industry!

FEATURES & BENEFITS
• KOHLER CH440 Engine Equipped with Electric-Start Capabilities
• Automatic Engine Idle for Fuel Economy and Long Service Life
• Atmospheric Unloading System to Help Reduce Fuel Consumption
• Rubber Engine Oil Drain Extension
• Simple Belt Tensioning
• 1/2” Shut-Off Valve
• Finned Aftercooler
• Stainless-Steel Reed Valves
• Heavy-Duty Steel Belt Guard Base
• Heavy-Duty Single Stage Pump with Cast-Iron Cylinder
• ASME Safety Relief Valve
• IP23 Rating
• Intake Filter with Silencer and Replaceable Element
• Remote Air Tank Options - 10, 22 and 28 gallon