Kits

Resources

Proper chassis specification information is key to the success of our product. Download this Application Data Form and fill it out completely and reurn back to your Sales Team member.

Choosing the right air compressor for your needs can be a daunting task.

In order to make it easier for you, lets ask a question first.

How are you going to drive the Air Compressor, i.e. Engine Driven, PTO Shaft Driven, or Hydraulic Driven. Click on any one of these links to determine what BOSS product you need for your CFM requirements.

Disclaimer: The information on the following pages is based on all tools, airlines and ancillary products are in new and/or like new working condition. This information is a recommendation only. Always check with the manufacturer for actual consumption of tools being used. The information provided here is based on averages and should be not considered accurate for any particular tools. Please consult a BOSS representative for a product that best suits your requirements.

Disclaimer: The following information is based on all tools, airlines and ancillary products are in new and/or like new working condition. The information below is a recommendation only. Always check with the manufacturer for actual consumption of tools being used. The information provided here is based on averages and should be not considered accurate for any particular tools. Please consult a BOSS representative for a product that best suits your requirements.


Air ToolAir Required (cfm @ 90 PSI)

Recommended BOSS Product(s)

1/2" Impact 28-39 cfm  Journeyman 30, MechanX,  Bullet 2
3/4" Impact 30-40 cfm  Journeyman 30, MechanX,  Bullet 2
1" Impact 40-50 cfm  Bullet 2 
3" Piercing Tools 28-32 cfm  Journeyman 30, MechanX,  Bullet 2
4" Piercing Tools 43-68 cfm  Bullet 2
30lb. Jack Hammer 37-50 cfm  Bullet 2
60lb. Jack Hammer 48-70 cfm  Bullet 2
90lb. Jack Hammer 62-85 cfm  Bullet 2, DUS
Grinders, 2" and 2 1/2" Wheels 14-20 cfm  Journeyman 18, Journeyman 30, MechanX, Bullet 2
Grinders, 6" - 8" Wheels 50 cfm   Bullet 2
Rotary Sanders, 7" Pads 30 cfm Journeyman 30,  MechanX, Bullet 2
Rotary Sanders, 9" Pads 53 cfm  Bullet 2
1" x 4" Cylinder 25 cfm Journeyman 30, MechanX, Bullet 2
1 1/4" x 5" Cylinder 28 cfm Journeyman 30,  MechanX, Bullet 2
1 1/2" x 6" Cylinder 39 cfm  Bullet 2
Chipping Hammers, Weighing 10-13Lbs. 28-30 cfm Journeyman 30,  MechanX, Bullet 2
Sump Pumps, 145 gal. (a 50 ft. Head) 70 cfm  Bullet 2, DUS
Plug Drills 40-50 cfm Bullet 2
Riveters, 3/32 - 1" Rivets 12 cfm Journeyman 18, Journeyman 30,  MechanX, Bullet 2
Rivet Busters 35-39 cfm   MechanX, Bullet 2
Steel Drills, Rotary Motors (Specs below)    
Capacity up to 1/4" weighing 1 1/4 - 4Lbs. 18-20 cfm Journeyman 18, Journeyman 30, MechanX, Bullet 2
Capacity up to 1/4" to 3/8" weighing 6 - 8Lbs. 20-40 cfm Journeyman 30,  MechanX, Bullet 2
Capacity up to 1/2" to 3/4" weighing 9 - 14Lbs. 70 cfm  Bullet 2, DUS
Capacity up to 7/8" to 1" weighing 25Lbs. 80 cfm  DUS
Capacity up to 1 1/4"  weighing 30Lbs. 90 cfm  DUS
Steel Drills, Piston Type (Specs below)    
Capacity up to 1/2" to 3/4" weighing 13 - 15Lbs. 45 cfm  Bullet 2
Capacity up to 7/8" to 1 1/4" weighing 25 - 30Lbs. 75-80 cfm  DUS
Capacity up to 1 1/4" to 2" weighing 40 - 50Lbs. 80-90 cfm  DUS
Capacity up to 2" to 3" weighing 55 - 75Lbs. 100-110 cfm  DUS
   
   
   
   
   
   
   
   

Disclaimer: The following information is based on all tools, airlines and ancillary products are in new and/or like new working condition. The information below is a recommendation only. Always check with the manufacturer for actual consumption of tools being used. The information provided here is based on averages and should be not considered accurate for any particular tools. Please consult a BOSS representative for a product that best suits your requirements.


Air ToolAir Required (cfm @ 90 PSI)Recommended BOSS Product(s)
1/2" Impact 28-39 cfm 80100-UBI
3/4" Impact 30-40 cfm 80100-UBI
1" Impact 40-50 cfm 80100-UBI
3" Piercing Tools 28-32 cfm 80100-UBI
4" Piercing Tools 43-68 cfm 80100-UBI
30lb. Jack Hammer 37-50 cfm 80100-UBI
60lb. Jack Hammer 48-70 cfm 80100-UBI
90lb. Jack Hammer 62-85 cfm 80100-UBI, 8060-UBI
Grinders, 2" and 2 1/2" Wheels 14-20 cfm 80100-UBI
Grinders, 6" - 8" Wheels 50 cfm  80100-UBI
Rotary Sanders, 7" Pads 30 cfm  80100-UBI
Rotary Sanders, 9" Pads 53 cfm  80100-UBI
1" x 4" Cylinder 25 cfm  80100-UBI
1 1/4" x 5" Cylinder 28 cfm  80100-UBI
1 1/2" x 6" Cylinder 39 cfm  80100-UBI
Chipping Hammers, Weighing 10-13Lbs. 28-30 cfm  80100-UBI
Sump Pumps, 145 gal. (a 50 ft. Head) 70 cfm  80100-UBI
Plug Drills 40-50 cfm  80100-UBI
Riveters, 3/32 - 1" Rivets 12 cfm  80100-UBI
Rivet Busters 35-39 cfm  80100-UBI
Steel Drills, Rotary Motors (Specs below)    
Capacity up to 1/4" weighing 1 1/4 - 4Lbs. 18-20 cfm  80100-UBI
Capacity up to 1/4" to 3/8" weighing 6 - 8Lbs. 20-40 cfm  80100-UBI
Capacity up to 1/2" to 3/4" weighing 9 - 14Lbs. 70 cfm  80100-UBI
Capacity up to 7/8" to 1" weighing 25Lbs. 80 cfm  80100-UBI, 8060-UBI
Capacity up to 1 1/4"  weighing 30Lbs. 90 cfm  8060-UBI
Steel Drills, Piston Type (Specs below)    
Capacity up to 1/2" to 3/4" weighing 13 - 15Lbs. 45 cfm  80100-UBI
Capacity up to 7/8" to 1 1/4" weighing 25 - 30Lbs. 75-80 cfm  80100-UBI
Capacity up to 1 1/4" to 2" weighing 40 - 50Lbs. 80-90 cfm  80100-UBI, 8060-UBI
Capacity up to 2" to 3" weighing 55 - 75Lbs. 100-110 cfm  8060-UBI
     
     
     
     
     
     
     
     

Disclaimer: The following information is based on all tools, airlines and ancillary products are in new and/or like new working condition. The information below is a recommendation only. Always check with the manufacturer for actual consumption of tools being used. The information provided here is based on averages and should be not considered accurate for any particular tools. Please consult a BOSS representative for a product that best suits your requirements.


Air Tool

Air Required
(cfm @ 90 PSI)

Abovedeck Recommended 
BOSS Piston Product(s)
Abovedeck Recommended
BOSS Rotary Screw Product(s)
Underdeck Recommended
BOSS Rotary Screw Product(s)
1/2" Impact 28-39 cfm  BA435, BA502 Infinity 35, Infinity 60 80100-UHBI
3/4" Impact 30-40 cfm  BA435, BA502 Infinity 35, Infinity 60 80100-UHBI
1" Impact 40-50 cfm  BA502  Infinity 60 80100-UHBI
3" Piercing Tools 28-32 cfm  BA435, BA502 Infinity 35, Infinity 60  80100-UHBI
4" Piercing Tools 43-68 cfm  BA502 Infinity 60, 80102-AHBI  80100-UHBI
30lb. Jack Hammer 37-50 cfm  BA435, BA502 Infinity 60, 80102-AHBI,  80100-UHBI
60lb. Jack Hammer 48-70 cfm N/A
80102-AHBI, 80201-AHBI 80100-UHBI
90lb. Jack Hammer 62-85 cfm  N/A   80102-AHBI, 80201-AHBI  80100-UHBI, 8060-UHBI
Grinders, 2" and 2 1/2" Wheels 14-20 cfm BA435  Series 35  80100-UHBI
Grinders, 6" - 8" Wheels 50 cfm BA502   Infinity 60, 80102-AHBI 80100-UHBI
Rotary Sanders, 7" Pads 30 cfm BA435, BA502 Infinity 35, Infinity 60 80100-UHBI
Rotary Sanders, 9" Pads 53 cfm N/A  Infinity 60  80100-UHBI
1" x 4" Cylinder 25 cfm BA435, BA502  Infinity 35, Infinity 60 80100-UHBI
1 1/4" x 5" Cylinder 28 cfm  BA435, BA502 Infinity 35, Infinity 60  80100-UHBI
1 1/2" x 6" Cylinder 39 cfm BA435, BA502  Infinity 35, Infinity 60 80100-UHBI
Chipping Hammers, Weighing 10-13Lbs. 28-30 cfm  BA435, BA502 Infinity 35, Infinity 60 80100-UHBI
Sump Pumps, 145 gal. (a 50 ft. Head) 70 cfm N/A  80102-AHBI, 80201-AHBI  80100-UHBI
Plug Drills 40-50 cfm BA502  Infinity 60, 80102-AHBI  80100-UHBI
Riveters, 3/32 - 1" Rivets 12 cfm BA435, BA502  Infinity 35 80100-UHBI
Rivet Busters 35-39 cfm  BA435, BA502 Infinity 35, Infinity 60 80100-UHBI
Steel Drills, Rotary Motors (Specs below)        
Capacity up to 1/4" weighing 1 1/4 - 4Lbs. 18-20 cfm BA435  Infinity 35  80100-UHBI
Capacity up to 1/4" to 3/8" weighing 6 - 8Lbs. 20-40 cfm  BA435, BA502 Infinity 35, Infinity 60 80100-UHBI
Capacity up to 1/2" to 3/4" weighing 9 - 14Lbs. 70 cfm N/A   80102-AHBI, 80201-AHBI 80100-UHBI
Capacity up to 7/8" to 1" weighing 25Lbs. 80 cfm N/A 80102-AHBI, 80201-AHBI  80100-UHBI, 8060-UHBI
Capacity up to 1 1/4"  weighing 30Lbs. 90 cfm  N/A   80102-AHBI, 80201-AHBI  8060-UHBI
Steel Drills, Piston Type (Specs below)        
Capacity up to 1/2" to 3/4" weighing 13 - 15Lbs. 45 cfm  BA502 Infinity 60, 80102-AHBI  80100-UHBI
Capacity up to 7/8" to 1 1/4" weighing 25 - 30Lbs. 75-80 cfm N/A   80102-AHBI, 80201-AHBI 80100-UHBI
Capacity up to 1 1/4" to 2" weighing 40 - 50Lbs. 80-90 cfm N/A   80102-AHBI, 80201-AHBI 80100-UHBI, 8060-UHBI
Capacity up to 2" to 3" weighing 55 - 75Lbs. 100-110 cfm N/A   80201-AHBI 8060-UHBI